Oil Water Separators
HEI Designed Oil Water Separators
Separation of oil from water in industrial waste streams is an initial step to obtain permit level discharge. Efficient oil/water separation is of prime importance in industrial waste treatment stages often required before final discharge.
The HEI corrugated plate separator is a sophisticated, compact, highly efficient gravity settling basin designed to fill this need.
The basic design of the HEI corrugated plate separator is shown below. When wastewater enters the separator inlet compartment, the velocity is slowed, allowing large solids to settle out in the sand collection compartment and large oil globules to float to the surface. The influent then passes through a distribution baffle and enters the plate pack compartment.
After passing through a quiescent zone, wastewater enters the corrugated plate pack. Here the finer oil droplets and settable solids are separated by gravity. The de-oiled wastewater flows into the effluent compartment and rises toward the effluent weir.
Both the plate pack compartment and effluent compartment are provided with an adjustable weir. Height is adjusted to balance the hydraulic loads so that only oil is skimmed off the surface of the plate pack compartment. An oil layer is maintained in this compartment and is automatically skimmed due to the difference in specific gravity of oil and water.
At the heart of the HEI corrugated plate separator is the plate pack. The standard plate pack consists of fifty corrugated plates spaced on 3/4″ centers. A cutaway view is shown below.
The plate pack is designed so that oil, as it separates from water, migrates to the underside of the plate above and collects in the peaks of the corrugations. The migration continues counter to the water flow toward the inlet of the plate pack. Sludge settles to the top of the next lower plate, collects in the valleys of the corrugations, and slides by gravity toward the outlet end of the plate pack.
Design and Engineering Services
HEI manufactures and sells fabricated steel vessels housing the corrugated plate pack. Each unit is designed to customer requirements and specifications. We design, manufacture and install every system as though we were going to us it ourselves.
Advantages of the Corrugated Plate Separator
• No moving parts.
• Low maintenance costs: unit seldom needs cleaning can be done by hosing down with a high pressure hose.
• Low operating costs – no power is required to operate unit.
• Low space requirements – unit has a retention time of 3-10 minutes, while other settling devices require 1-10 hours.
• Low capital expenditure.
Separator Applications
• Oil Production – Oil removal from produced water.
• Oil Refineries – Oil and sludge removal from wastewater.
• Petrochemical – Oil and solids removal from process streams and wastewater.
• Steel Mills – Solids and oil removal from process water, cooling and wastewater.
• Marine Terminals – Removal of oil spilled in transfer.
• Truck Terminals – Removal of oil spilled in transfer.
• Industrial Plants – Removal of oil and solids from wash down and wastewater.
Quick Sizing Chart
The chart below illustrated the relationship between capacity, particle size, temperature, and specific gravity for the HEI corrugated plate separator.
Because the plate pack is a gravity type separator, its efficiency is determined by the rising or settling velocity of the smallest particles to be intercepted. The following sizes may be used as design guidelines.
• Runoff or Washdown 90 Micron
• Industrial Waste Systems 60 Micron
• Produced Water 40-50 Micron
Example: Given an industrial stream of 100 gpm at 68°F; specific gravity, water = .995; specific gravity, oil = .895 determine separator size required and actual 100% particle removal size.
Locate 85°F on the horizontal temperature scale of the chart below. Project vertically to intercept 60 microns on the particle size scale. Next, project horizontally until crossing the differential specific gravity of 0.1 (0.995 minus 0.895). Next, project vertically down to the through-put scale and read 200 gpm.
The HEI corrugated plate separator is a sophisticated, compact, highly efficient gravity settling basin designed to fill this need.